Jk-d3 coordinated adaptive signal controller is a terminal control device used to control traffic lights in traffic signal control systems. The signal control scheme can be set and the traffic lights can be controlled through the touch panel. It can also be connected to the traffic signal control network to receive and process the signal control scheme from the traffic signal control platform remotely and control the signal lamp to execute instructions.
It supports routing function, flexible peripheral IOT equipment access, and can be used as an IoT edge computing gateway at the intersection of a smart city.
This control mechanism is a full-function signal machine designed and manufactured according to the China standard.
|Timing scheme||Support 32 timing schemes|
|Time period configuration||Support 48 time periods|
|Special date||Support 32 special dates and 7 weeks configuration (Monday to Sunday)|
|Data interface||2 RS232 serial ports, 2 RS485 ports, 4 Ethernet ports, 2 USB ports|
|Surge protection||Power supply lightning protection, network lightning protection|
|Remote control function:||A mobile terminal, side panel, remote control, cloud platform control.|
|Power supply||Rated voltage of signal power supply: AC220V ± 20%, 50Hz ± 2Hz, and AC220V power backup socket is installed in the cabinet|
|Power consumption of the whole machine||≥50w(excluding LCD screen)|
|insulation ferset||The insulation resistance of the signal is greater than 100m Ω|
|withstand voltage||Apply 1500V, 50Hz voltage between the power electrode or other conductive circuits connected with the power electrode, cabinet, installation cabinet, and other accessible parts, without breakdown.|
|Working temperature range||-40~+70℃|
|Humidity||Relative humidity of normal operation: 10% – 95% (no condensation)|
|Waterproof||It has passed the rain test and works normally during and after the test. There is no water seepage or ponding inside the signal controller cabinet|
|Dustproof||The traffic signal controller works normally during and after the dust test, and there is no large amount of dust in the signal controller cabinet|
|Rustproof||The signal controller works normally after salt spray test, and the metal parts such as the signal controller cabinet and internal frame are not seriously rusted|
|Specification and size||700mm×510mm×1410mm|
|Terms of Trade|
|MOQ||1 PCS(Sample service)|
|package Details||According to the display dimension|
|levering Detail||25-35 days after deposit|
|Betellingsbetingsten||T/T(30% in advance,70% before shipment)|
1. Meet the requirements of gb25280-2016 Level C, support NTCIP communication protocol; support special date, multi-period,multi-phase scheme configuration; standard 48 channel output, maximum 108 channel output;
2.Beidou/GPS dual-mode timing and positioning;
3. Adopting cortex-a57 64 bit microprocessor, it can support complex operation and realize powerful real-time communication function;
4.Wired and wireless flexible networking, support dual network support, and online at the same time;
5. It supports multiple traffic detection data access such as microwave, video, radar, etc. and adaptive variable lane control according to the length of queuing vehicles;
6. Wireless remote control, manual emergency control function, support yellow flash, all red, light off, forced release and other signal control functions;
7.Pedestrian crossing button, BRT bus priority, emergency vehicle priority control; support single adaptation, trunk green wave, regional adaptation;
8.Real-time fault detection and system log recording function, automatic fault degradation processing function;
9.Signal lamp level abnormal, fault detection, automatic feedback;| Automatic detection of phase green conflict;
10. Support independent yellow flash;
11.Support pulse and communication countdown;
12.LCD touch screen, human-computer interface;
13. Data is automatically saved in case of power failure;
14.Dual hot standby, automatic switching;
15. It supports routing function, flexible peripheral IOT equipment access, and is used for IoT edge computing gateway of smart city intersection;
16. The traffic signal output based on DSRC protocol can provide support for people and vehicles.
Q1: Are you a manufacturer or trading company?
A1: We are manufacturer and our factory is located in Foshan, Guangdong Province, we also have our own R&D team. Welcome to visit us!
Q2. Can I have a sample order for IoT Traffic Signal Controller?
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.
Q3: Can you provide customized design services according to a concept or drawing?
A2: Yes, we are a flexible manufacturer, and also regarding our product characteristics we can provide customized products,you only need to provide your requirement or a detailed drawing we can produce for you.
Q4. How to proceed with an order for IoT Traffic Signal Controller?
A: Firstly let us know your requirements or application.
Secondly, We quote according to your requirements or our suggestions.
Thirdly customer confirms the samples and places a deposit for formal order.
Fourthly We arrange the production.
Q5: Do you offer a guarantee for the products?
A: Yes, we offer 2 years warranty on our products.
Q6: How to solve the quality problems after sales?
A: Please provide the problem details. We will make a satisfied solution for you within 24 hours after we confirm the problems.