LEDbow 物聯網交通信號控制器

Jk-d3 coordinated adaptive signal controller is a terminal control device used to control traffic lights in traffic signal control systems. The signal control scheme can be set and the traffic lights can be controlled through the touch panel. It can also be connected to the traffic signal control network to receive and process the signal control scheme from the traffic signal control platform remotely and control the signal lamp to execute instructions.

產品信息

產品標籤

產品詳情

Jk-d3 coordinated adaptive signal controller is a terminal control device used to control traffic lights in traffic signal control systems. The signal control scheme can be set and the traffic lights can be controlled through the touch panel. It can also be connected to the traffic signal control network to receive and process the signal control scheme from the traffic signal control platform remotely and control the signal lamp to execute instructions.

It supports routing function, flexible peripheral IOT equipment access, and can be used as an IoT edge computing gateway at the intersection of a smart city.
This control mechanism is a full-function signal machine designed and manufactured according to the China standard.

Product Details(Ref.)(Customized)

Timing scheme Support 32 timing schemes
Time period configuration Support 48 time periods
Special date Support 32 special dates and 7 weeks configuration (Monday to Sunday)
Data interface 2 RS232 serial ports, 2 RS485 ports, 4 Ethernet ports, 2 USB ports
Surge protection Power supply lightning protection, network lightning protection
Remote control function: A mobile terminal, side panel, remote control, cloud platform control.
Power supply Rated voltage of signal power supply: AC220V ± 20%, 50Hz ± 2Hz, and AC220V power backup socket is installed in the cabinet
Driving power 36W
Power consumption of the whole machine ≥50w(excluding LCD screen)
絕緣電阻 The insulation resistance of the signal is greater than 100m Ω
耐壓 Apply 1500V, 50Hz voltage between the power electrode or other conductive circuits connected with the power electrode, cabinet, installation cabinet, and other accessible parts, without breakdown.
Working temperature range -40~+70℃
Humidity Relative humidity of normal operation: 10% – 95% (no condensation)
Waterproof It has passed the rain test and works normally during and after the test. There is no water seepage or ponding inside the signal controller cabinet
Dustproof The traffic signal controller works normally during and after the dust test, and there is no large amount of dust in the signal controller cabinet
Rustproof The signal controller works normally after salt spray test, and the metal parts such as the signal controller cabinet and internal frame are not seriously rusted
IP rate IP55
Specification and size 700mm×510mm×1410mm

交易條件
MOQ 1 PCS(樣品服務)
包詳細信息 According to the display dimension
交貨詳細 存款後25-35天
付款條件 T / T(提前30%,發貨前70%)

Features:

1. Meet the requirements of gb25280-2016 Level C, support NTCIP communication protocol; support special date, multi-period,multi-phase scheme configuration; standard 48 channel output, maximum 108 channel output;

2.Beidou/GPS dual-mode timing and positioning;

3. Adopting cortex-a57 64 bit microprocessor, it can support complex operation and realize powerful real-time communication function;

4.Wired and wireless flexible networking, support dual network support, and online at the same time;

5. It supports multiple traffic detection data access such as microwave, video, radar, etc. and adaptive variable lane control according to the length of queuing vehicles;

6. Wireless remote control, manual emergency control function, support yellow flash, all red, light off, forced release and other signal control functions;

7.Pedestrian crossing button, BRT bus priority, emergency vehicle priority control; support single adaptation, trunk green wave, regional adaptation;

8.Real-time fault detection and system log recording function, automatic fault degradation processing function;

9.Signal lamp level abnormal, fault detection, automatic feedback;| Automatic detection of phase green conflict;

10. Support independent yellow flash;

11.Support pulse and communication countdown;

12.LCD touch screen, human-computer interface;

13. Data is automatically saved in case of power failure;

14.Dual hot standby, automatic switching;

15. It supports routing function, flexible peripheral IOT equipment access, and is used for IoT edge computing gateway of smart city intersection;

16. The traffic signal output based on DSRC protocol can provide support for people and vehicles.

[模板 id="245"]

常問問題

Q1: Are you a manufacturer or trading company?

A1: We are manufacturer and our factory is located in Foshan, Guangdong Province, we also have our own R&D team. Welcome to visit us!

Q2. Can I have a sample order for IoT Traffic Signal Controller

答:是的,我們歡迎訂購樣品以測試和檢查質量。混合樣品是可以接受的。

Q3: Can you provide customized design services according to a concept or drawing

A2: Yes, we are a flexible manufacturer, and also regarding our product characteristics we can provide customized products,you only need to provide your requirement or a detailed drawing we can produce for you.

Q4. How to proceed with an order for IoT Traffic Signal Controller

答:首先讓我們知道您的要求或應用。
Secondly, We quote according to your requirements or our suggestions.
Thirdly customer confirms the samples and places a deposit for formal order.
第四,我們安排生產。

Q5: Do you offer a guarantee for the products?

A: Yes, we offer 2 years warranty on our products.

Q6: 售後如何解決質量問題?

A: Please provide the problem details. We will make a satisfied solution for you within 24 hours after we confirm the problems.

發送您的信息給我們:

現在查詢
現在查詢