LEDbow物联网交通信号灯控制器

Jk-d3 coordinated adaptive signal controller is a terminal control device used to control traffic lights in traffic signal control systems. The signal control scheme can be set and the traffic lights can be controlled through the touch panel. It can also be connected to the traffic signal control network to receive and process the signal control scheme from the traffic signal control platform remotely and control the signal lamp to execute instructions.

产品明细

商品标签

产品详情

Jk-d3 coordinated adaptive signal controller is a terminal control device used to control traffic lights in traffic signal control systems. The signal control scheme can be set and the traffic lights can be controlled through the touch panel. It can also be connected to the traffic signal control network to receive and process the signal control scheme from the traffic signal control platform remotely and control the signal lamp to execute instructions.

It supports routing function, flexible peripheral IOT equipment access, and can be used as an IoT edge computing gateway at the intersection of a smart city.
This control mechanism is a full-function signal machine designed and manufactured according to the China standard.

产品详细信息(参考)(定制)

Timing scheme Support 32 timing schemes
Time period configuration Support 48 time periods
Special date Support 32 special dates and 7 weeks configuration (Monday to Sunday)
Data interface 2 RS232 serial ports, 2 RS485 ports, 4 Ethernet ports, 2 USB ports
Surge protection Power supply lightning protection, network lightning protection
Remote control function: A mobile terminal, side panel, remote control, cloud platform control.
Power supply Rated voltage of signal power supply: AC220V ± 20%, 50Hz ± 2Hz, and AC220V power backup socket is installed in the cabinet
Driving power 36W
Power consumption of the whole machine ≥50w(excluding LCD screen)
绝缘电阻 The insulation resistance of the signal is greater than 100m Ω
耐压 Apply 1500V, 50Hz voltage between the power electrode or other conductive circuits connected with the power electrode, cabinet, installation cabinet, and other accessible parts, without breakdown.
Working temperature range -40~+70℃
湿度 Relative humidity of normal operation: 10% – 95% (no condensation)
Waterproof It has passed the rain test and works normally during and after the test. There is no water seepage or ponding inside the signal controller cabinet
Dustproof The traffic signal controller works normally during and after the dust test, and there is no large amount of dust in the signal controller cabinet
Rustproof The signal controller works normally after salt spray test, and the metal parts such as the signal controller cabinet and internal frame are not seriously rusted
IP rate IP55
Specification and size 700mm×510mm×1410mm

交易条件
MOQ 1 PCS(样品服务)
包详细信息 根据显示尺寸
交货详细 定金后25-35天
付款条件 T / T(提前30%,发货前70%)

Features:

1. Meet the requirements of gb25280-2016 Level C, support NTCIP communication protocol; support special date, multi-period,multi-phase scheme configuration; standard 48 channel output, maximum 108 channel output;

2.Beidou/GPS dual-mode timing and positioning;

3. Adopting cortex-a57 64 bit microprocessor, it can support complex operation and realize powerful real-time communication function;

4.Wired and wireless flexible networking, support dual network support, and online at the same time;

5. It supports multiple traffic detection data access such as microwave, video, radar, etc. and adaptive variable lane control according to the length of queuing vehicles;

6. Wireless remote control, manual emergency control function, support yellow flash, all red, light off, forced release and other signal control functions;

7.Pedestrian crossing button, BRT bus priority, emergency vehicle priority control; support single adaptation, trunk green wave, regional adaptation;

8.Real-time fault detection and system log recording function, automatic fault degradation processing function;

9.Signal lamp level abnormal, fault detection, automatic feedback;| Automatic detection of phase green conflict;

10. Support independent yellow flash;

11.Support pulse and communication countdown;

12.LCD touch screen, human-computer interface;

13. Data is automatically saved in case of power failure;

14.Dual hot standby, automatic switching;

15. It supports routing function, flexible peripheral IOT equipment access, and is used for IoT edge computing gateway of smart city intersection;

16. The traffic signal output based on DSRC protocol can provide support for people and vehicles.

[模板 id="245"]

常问问题

Q1:您是制造商还是贸易公司?

A1:我们是制造商,工厂位于广东省佛山市,我们也拥有自己的研发团队。欢迎访问我们!

Q2。我可以订购样品吗 IoT Traffic Signal Controller

答:是的,我们欢迎样品为了测试和检查质量。混合样品是可接受的。

Q3: 你能 根据概念或图纸提供定制设计服务

A2:是的,我们是一家灵活的制造商,并且就我们的产品特性而言,我们可以提供定制产品,您只需要提供您的要求或我们可以为您制作的详细图纸即可。

Q4. How to proceed with an order for IoT Traffic Signal Controller

答:首先,让我们知道您的需求或应用程序。
其次,我们根据您的要求或建议报价。
第三,客户确认样品并存入正式订单的押金。
第四,我们安排生产。

Q:您对产品提供保证吗?

答:是的,我们对产品提供2年保修。

Q6: 如何解决售后质量问题?

答:请提供问题详细信息。我们会在确认问题后的24小时内为您提供满意的解决方案。

发送邮件给我们:

立即询问
立即询问